Security:LS-10

LS-10 home magament gateway

                     

Input Power

 7V DC/850mA power adapter

Standby Current

About 280mA 

Transmission RF

433MHz, 868MHz or 915MHz, compliant with local regulations 

RF Data Modulation

OOK (On Off Key).

Transmit RF Power

 less than 10mW.

Range

about 100m to 300m + @open field, 25℃ (Depends on sensor).

RF Receiver Type

super heterodyne.

RF Security Code

16,777,216 combinations with check sum for each type of sensors.

Over 4 billion combinations in total.

Communication Link

Ethernet or wifi

Event Log: Max

512 records.

Display

4 LEDs (Away/Home/Disarm/Data). 

Sensor Zones

total 288 zones. (Burglar zones x 128, Fire zones x 64, Controller zones x 32,

 Medical zones x 32, Special sensor zones x 32)

Memory Back-up

CR 2032 Li battery, back-up time minimum 1 year for a new battery without power.

Back Up Battery Connector

5V USB power pack (excluding)

Delay Activation Time

0- 255 seconds programmable. 

Digital Interfaces

Micro USB socket (None for LS-10N)

Internet Interface

RJ45, or wifi.

Automation Switch control

RJ11 6-pin for X-10 switches and XRM-01 Relay Modules.

RF wireless power switch. 

Internet CMS protocol

Proprietary Scientech Protocol (ST-I, ST-II), CSV and SIA ADM-CID (2007) IP Alarm protocol. 

Wire Sensor Input

One input, can be assigned for Panic, Burglar, Fire, Medical, Tamper or Controller usage. 

Alarm Out

Open collector transistor output with 5.1Ω in series (max 200mA). For 6V external siren or other alarm device.

Clock Accuracy

within 5 seconds daily. (None for LS-10N)

Operation Temp.

-10℃~50℃.

Storage Temp.

-20℃~55℃.

Humidity

10-95%RH.

Size

118x78x32 mm.(Main body)

Weight

about 108 g. (Main body)